The operation and attention of BIGGER super adhesive

Happy

The operation and attention of BIGGER super adhesive
Recently received a lot of customer response to get the super glue will not use, today BUGGER teach you how to use the super adhesive?
For large area objects:
1.        Clean base material, dust and so on.
2.        Squeeze "Z" or well word on the back of the adhesive.
3.        Scrape the glue to 1-2mm thick with a squeegee or sleeve.
4.        Splice
For small area objects, elevation bearing objects:
The procedure is the same as the bonding method of large area objects, but the second steps are punctuate or strip extruded on the back.
Notes for the super adhesive:
The construction of the substrate:
1.        Ceramic tile wall, paint wall and other solid base materials need to clean the dirt and stains, and ensure that the surface is clean.
2.        In order to stabilize the effect and use this product to stick to the location, it is suggested to fix it one step at a time, so as to prevent the adhesive from falling off with lime.
Other matters needing attention:
1.        Children should not touch and avoid prolonged exposure to high temperature.
2.        The construction environment is not controlled by our company.Therefore, the company only guarantees that the products meet the relevant standards, and other accidental incidental losses are not liable.